Bloon flowers tutorial

Bloon flowers tutorial

Materials:

– Bloons.

– Some beads.

– Wire.

– Scissors.

– Tape.

– A Vase.

How to make bloon flowers.

Each bloon flower have 5 petals and 5-7 beads to make stamens

Step 1: Cut the wire into 5 pieces with 25cm, twist 2 ends of the wire together.

Step 2: Insert the wire into the bloon (bend for long wire to insert it into the bloon), curved the wire into shaped petal as you want, and pull out the ball down, twisted it with the wire, use tape to fixed them together. Make the same way with other petals.

Step 3: Insert one end of the wire through one bead, fold in half and twist 2 ends of the wire together to have stamens.

Step 4: Arrange petals and stamens to have a flower, you can put the petals into the vortex or petals separated out.

and put the stamen at the center of the petals.

Use yarn or tape roll around to have the flower,

Step 5: Bending petals outwards

Step 6: Use tape to roll the branch of flowers, and make leaves. We are done.

 

Beautiful butterfly wings for kids

Beautiful butterfly wings for kids

Materials:

– White fabric.

– Needle and yarn.

– Wire.

– Scissors.

– Beads.

– Glue gun.

– Pliers

Let’s start!

Step 1: Cut wire into 4 stages: 50 cm to make large wings, 40 cm to make small wings. and to form butterflies shape like that:

Step 2: Fold the fabric in half and insert the wire inside. Use needle to sew around the wire.

Make the same way with other wings.

Step 3: Cut off the fabric outside the wings, as picture.

Step 4: Sew and glue 4 wings together to have butterfly wings.

Step 5: Use excess fabric to roll them and use round fabric to sew the head. and glue

eyes with black bead. Make antennaes by wire and 2 beads. Glue beads on the wings along the sewing lines.

Step 6: Sew 2 strips below abdominal surface of the butterfly to make strap on shoulder

Step 7: Fold 2 rose with fabric and glue on back of the butterfly.

We done!

Crochet buttons bracelet tutorial

Crochet buttons bracelet tutorial

Materials: 

– Buttons.

– Hook.

– Yarn.

Crochet bracelet tutorial

Step 1: ch 5, 5 dc in the 4th chain from the hook.

Step 2: Crochet 5 half double crochet in one hole on the first button, crochet 5 half double crochet in the next hole on the first button,

Step 3: Crochet the same way with the second button.

Crochet the same until you have enough length for your hand. I crochet with 7 buttons.

Step 4: ch 15, 1slst to form a circle, crochet 25 sc in the circle to have a hole for one the button ( depending on the button that crochet the circle)

Step 5: {Crochet 5 half double crochet in one hole on the first button, crochet 5 half double crochet in the next hole on the first button, sc 1 in the middle between the two buttons}. In my way, i crochet { …} 7 times. 1 slst.

Step 6: Sewing one the button on the 5 dc. You can decor for the nice bracelet with crochet for border of the bracelet. We are done.

Easy ring for kids: beading tutorial

Easy ring for kids: beading tutorial

Materials Needed:

– Stretch cord.

– Scissors

– Size 11o or 10o seed beads. ( green, black and red beads)

– Hairclips

Beading ring tutorial:

Step 1: (Pick up 3 green beads, Slide them down the stretch cord) 8 times.

Step 2: Pick up 3 beads: 1 green, 1red, 1green, Slide them down the stretch cord.

Step 3: Pick up 4 beads: 1 green, 2 red, 1green, Slide them down the stretch cord.

Step 4: Pick up 5 beads: 1 green, 1 red, 1 black, 1 red,  1green, Slide them down the stretch cord.

Step 5: Pick up 7 beads,  1 green, 1 red, 3 black, 1 red,  1green, Slide them down the stretch cord.

Step 6: Pick up 9 beads, 1 green, 1 red, 5 black, 1 red,  1green, Slide them down the stretch cord.

Step 7: Pick up 11 beads, 1 green, 1 red, 7 black, 1 red,  1green, Slide them down the stretch cord.

Step 8: the same step 6.

Step 9: the same step 5.

Step 10: the same step 4.

Step 11: the same step 3.

Step 12: the same step 2.

Step 13: the same step 1 ( depends on your finger that measured accordingly)

Finish this ends as desired, secure the stretch cord and trim.

We are done!

Valentine heart: Beading heart hairclip tutorial.

 

Valentine heart: Beading heart hairclip tutorial.

Materials Needed:

– Wire.

– Scissors

– Size 11o or 10o seed beads.

– Hairclips

Beading heart tutorial:

Beading the first end of the heart.

Step 1: Pick up 1 bead, Slide them down the wire.

Step 2: Pick up 3 beads, Slide them down the wire.

Step 3: Pick up 5 beads, Slide them down the wire.

Step 4: Pick up 7 beads, Slide them down the wire.

Step 5: Pick up 9 beads, Slide them down the wire.

Step 6: Pick up 11 beads, Slide them down the wire.

Step 7: Pick up 12 beads, Slide them down the wire.

Step 8: Pick up 12 beads, Slide them down the wire.

Step 9: Pick up 13 beads, Slide them down the wire.

Step 10: Pick up 11 beads, Slide them down the wire.

Step 11: Pick up 9 beads, Slide them down the wire.

Step 12: Pick up 6 beads, Slide them down the wire.

Finish this ends as desired, secure wires and trim.

Beading another end of the heart.

Step 1′: Pick up 1 bead and roll the outer wire through the wire on step 1. Slide them down the wire.

Step 2′: Pick up 3 beads and roll the outer wire through the wire on step 2. Slide them down the wire.

Step 3′: Pick up 5 beads and roll the outer wire through the wire on step 3. Slide them down the wire.

Step 4′: Pick up 7  beads and roll the outer wire through the wire on step 4. Slide them down the wire.

Step 5′: Pick up 9  beads and roll the outer wire through the wire on step 5. Slide them down the wire.

Step 6′: Pick up 11  beads and roll the outer wire through the wire on step 6. Slide them down the wire.

Step 7′: Pick up 12  beads and roll the outer wire through the wire on step 7. Slide them down the wire.

Step 8′: Pick up 12 beads, Slide them down the wire.

Step 9′: Pick up 13 beads, Slide them down the wire.

Step 10′: Pick up 11 beads, Slide them down the wire.

Step 11′: Pick up 9 beads, Slide them down the wire.

Step 12′: Pick up 6 beads, Slide them down the wire.

Finish this ends as desired, secure wires and trim.

Attach the heart on the hairclip, we have sweet heart hairclip for Valentine and gifts

Halloween craft ideas: lace and bead earrings tutorial.

Halloween craft ideas: lace and bead earrings tutorial.

Material:

– Orange lace.

– Needle and orange yarn.

– Black beads.

– Scissors.

– 2 jump rings and earring hooks.

How to make lace and bead earrings

1. Cut off some lace. If you’re making earrings, then you only need to cut off four flowers. Just be careful where you cut so you don’t ruin a flower you are going to use. (tow flowers for one earring)

2. Now carefully cut around the flowers

3. Superimposed the first flower on the second flower so that two flowers so close to each other.

4. Sewing border of the flowers with Blanket Stitch and black beads, one blanket stitch, string one bead, one blanket stitch with that one bead.

Except the leave part, we sew with  blanket stitch.

5. Add jump rings and earring hooks and you are all done!

Happy Halloween day!!!

 

Cute jewelry with plastic straws

Christmas wreath from plastic straws

Material:

– Straws.

– Scissors.

– Needle and yarn.

– Ribbon.

Let’s start!

How to fold beads from plastic straws?

Step 1: Cut off the  elastic of the straw.

Step 2: Using the scissors to flatten the straw.

Step 3: Tie one knot on left end, like that.

Step 4: Cut off the short end, and cut beveled the right end.

Step 5: Drag the right end with counter-clockwise and threaded the beveled end below one edge of the knot. making the same way until finish the straw.

Step 6: Cut off the excess, we have a bead.

Making the same way with other bead.

Step 7: String plastic straw beads with yarn and bow.

We have Christmas wreath.

Cute jewelry with plastic straws: We have kid necklace.

We have cute bracelet.

Making bead necklaces for kids

Making bead necklaces for kids

Step 1.

- Cut 4 pieces of stretch cord (15cm), each piece, string one small bead and tie the knot with the bead.

Cut off short piece of stretch cord, string one big bead and one small bead. Tie the knot the string will get a little shorter.

(Tie the other knot so that the distance to the knot before is 2cm. String one small bead, one big bead, one small bead. Tie the knot the string will get a little shorter) 3 times. One small bead, one big bead, one small bead is one group.

We have:

Cut off short piece of stretch cord.

– Cut 4 pieces of stretch cord (20cm), each piece make the same 15cm stretch cord and string more 2 bead groups.

– Cut 4 pieces of stretch cord (25cm), each piece make the same 20cm stretch cord and string more 2 bead groups.

– Cut one piece of stretch cord (30cm), make the same 20cm stretch cord and string more 2 bead groups.

Step 2:  Cut one piece of stretch cord  and tie one end of the jump-ring, top the knot with a dab of glue.

Step 3: String 50 small beads

 Step 4:  Tie the knots at the midde of the shortest piece of stretch cord (20cm).

Step 5: String 8 small beads.

Step 6: Tie the knots at the midde of the shortest piece of stretch cord (20cm), the same step 4.

Step 7: (Repeat step 5 and step 6) 2 times with 2 pieces of stretch cord (25cm).

Step 8: (Repeat step 5 and step 6) one time with one piece of stretch cord (30cm).

Step 9: Repeat step 7.

Step 10: Repeat step 4,5,6

Step 11: String 50 small beads and tie the other end of the jump-ring, Tie the knot the string will get a little shorter.

Circle crochet necklace and beads

Beautiful and easy crocheted necklace for kids.

Circle crochet necklace and beads

Material:

– Beads.

– 7 plastic circles.

– White yarn and black yarn.

– Needle and thread.

– Glue.

Let’s start!

Step 1: Crochet around a circle with black and white yarn like that. ( we crochet 4 black circles and 3 white circles).

We have black and white circles:

 

Step 2: Cut one piece of thread or stretch cord and tie one end of the cut piece to one of the  install the lobster clasp, top the knot with a dab of glue. (The length of your cord piece will depend on the style necklace you would like to make)

Step 3: Lay out the beads in order so you can easily grab them while assembling the necklace. String 14 beads onto the piece of thread that you prepared in step 1.

Step 4: String one edge of the black circle onto the piece of thread, string one bead and string other edge of the black circle.

String one bead and string one edge of the white circle onto the piece of thread, string one bead and string other edge of the withe circle  like that.

Repeat step 4 three times, string one bead and string one edge of the black circle onto the piece of thread, string one bead and string other edge of the black circle.

Step 5: String 15 beads.

Step 6: To finish, install the toggle clasps at the end.

 

Refresh haircomb for summer with pearls

Refresh haircomb for summer with pearls

Material:

Haircomb.

Yarn.

Pearls.

Scissors.

Let’s start!

Step 1: String bead with yarn.

Step 2: Tie the yarn on outside of the haircomb (between the two slots of the haircomb)

Step 3: Rolling around this  slots of the haircomb with one bead.

Steep 4: Rolling around  next slots of the haircomb with one bead, making the same way until at the end of the haircomb.

Finish off.

Happy summer!!!